Aquablanc O2 Tablets - 1kg
|Sanitizer Type||Active Oxygen|
|Active Ingredients||Pentapotassium peroxymonosulphate|
|Net Weight||1 kg|
These O2 tablets destroy bacteria and remove organic impurities. They must be used in conjunction with Aquablanc Active Oxygen Activator Liquid.
Initial dose : Add two Aquablanc O2 tablets per 1500 litres of spa water.
Before every use : Add one tablet per 1500 litres of spa water. Apply weekly if the spa is not used.
Aquablanc O2 tablets should be applied using a floating dispenser.
Test the Active Oxygen level one hour after application of the tablets. The level should be 5 - 10 ppm.
A weekly application of a chlorine-based shock, such as Splash Spas Spa Shock Express, is recommended for best results.
Most Recent Product Reviews for Aquablanc O2 Tablets - 1kg ... 2 Review(s) in total
- Doesn't work well
Review by : Richard Posted on : 17/07/2012
This product (or more likely a carrier chemical component used to form the tablets) does not work well. It causes a chalky powder to form on the surface of the water which is difficult to dissolve irrespective of whether dispensed via a floating dispenser or adding tablets directly to the water. I should add that water condition makes little difference (i.e. TA, PH and associated activator are all correctly set with fresh water and it still happens). I have used this product once last season with a similar experience and found it to be considerably inferior to the previously available alternate Baykrolar Active Oxygen system.
- good company
Review by : andrew hallett Posted on : 19/11/2010
execellent service and quality as always