Aquasparkle Spa Chemicals Total Alkalinity Increaser

AQUASPARKLE TA PLUS

What is AquaSPArkle TA Plus?

AquaSPArkle TA Plus will increase the Total Alkalinity in your spa water.

Why should you balance the Total Alkalinity of your spa water?

Low Total Alkalinity causes hot tub water to be corrosive.  The effect of this corrosion may be seen in staining, etching or distorting of the tub surface and in damage to the pump and heating systems.  Low Total Alkalinity may also cause the pH of the water to fluctuate excessively.

You can measure the level of Total Alkalinity in your water using any of the freely available hot tub water testing options.

You should maintain total alkalinity levels within the ranges shown in the following table.

>

Sanitiser	Recommended TA range
Chlorine / Bromine	125 - 150 ppm (mg/litre)
PristineBlue	30 - 90 ppm (mg/litre)
BaquaSpa	80 - 120 ppm (mg/litre)
Aquagarde / Active Oxygen	30 - 150 ppm (mg/litre)

Directions for Use:

Pre-dissolve the required amount of AquaSPArkle TA plaus with clean water in a clean container.  Turn on your pumps and pour the mixture evenly around the perimeter of your hot tub.

Size of your hot tub	To raise the Total Alkalinity...
	10 mg/l	20 mg/l	50 mg/l	100 mg/l
500 litres / 110 gals	9g	18g	45g	90g
1000 litres / 220 gals	18g	36g	90g	180g
1500 litres / 330 gals	27g	54g	135g	270g

 

You should always adjust your Total Alkalinity before you adjust the calcium hardness or pH. 

Compatible with chlorine, bromine, pristine blue and biguanide sanitisers.

Contains Sodium Bicarbonate - 1 kilogram.                  £