Leisure Time Spa pH Increaser

 LEISURE TIME Spa UP

What is Leisure Time Spa Up?

Leisure Time Spa Up is available  as either a granular or liquid product to adjust water pH upwards.

What is pH?

pH is a measure of the acidity or alkalinity of your water.  The pH scale has a range of 0 – 14, with 7.0 being neutral.  Water with a pH below 7.0 is acidic and above 7.0 is alkaline.

A number of factors can affect the pH of your spa water, such as dilution with fresh water, introduction of air, chemicals and bathers, so it is important that it is checked on a regular basis.

Why should you balance the pH of your spa water?

Hot tub water with very low pH (acidic water) can cause corrosion of your equipment and staining on the tub surfaces. It can also be very unpleasant to bath in.

In addition many sanitisers do not perform efficiently if the pH of the water is not maintained within a specified range.

What is the optimum level of pH in hot tub water?

A number of factors can affect the pH of your spa water, such as dilution with fresh water, introduction of air, chemicals and bathers, so it is important that it is checked on a regular basis.

The pH level should be maintained within the ranges shown in the table.

Directions for Use:

Leisure Spa Up is a granular formula.  For best results it should be dissolved in a small plastic container filled with spa water. 

Leisure Time Liquid Spa Up may be used directly from the bottle.

1. Make sure equipment is OFF.

2. Add 1oz (55g or 2 tablespoons) of granular product for every 1900 litres of spa water.  Alternatively, add 1 oz (30ml) of Liquid Spa Up

3. Turn on circulation system for 1-3 hours (30 minutes if using Liquid Spa Up)

4. Retest water after 3 hours (30 minutes if using Liquid Spa Up)

5. If pH is still low, repeat steps 1-4

Compatible with chlorine, bromine and biguanide sanitisers.

Spa Up Contains: 100% Sodium Bicarbonate   968g                £     

Liquid Spa Up Contains: 24% Potassium Carbonate   946 ml                £