Spaguard balance Pak 100

SPAGUARD BALANCE PAK 100

What is Balance Pak 100?

Balance Pak 100 is a safe and convenient way to increase the Total Alkalinity of your hot tub water.

Why should you balance the Total Alkalinity of your spa water?

Low Total Alkalinity causes hot tub water to be corrosive.  The effect of this corrosion may be seen in staining, etching or distorting of the tub surface and in damage to the pump and heating systems.  Low Total Alkalinity may also cause the pH of the water to fluctuate excessively.

You can measure the level of Total Alkalinity in your water using any of the freely available hot tub water testing options.

You should maintain total alkalinity levels within the ranges shown in the following table.

Directions for Use:

Mix the required amount of Balance Pak 100 with clean water in a clean container until dissolved.  Turn on your pumps and pour the mixture evenly around the perimeter of your hot tub.

You should always adjust your total alkalinity before you adjust the calcium hardness or pH.  Consequently, when using other SpaGuard Balance Pak products, always apply Balance Pak 100 to the water first.

Compatible with chlorine, bromine, pristine blue and biguanide sanitisers.

Contains Sodium Bicarbonate - 1 kilogram.              

£